Yamaha TZ250M1, Руководство по эксплуатации для владельца

Страница: 74 / 287

REAR BRAKE PAD INSPECTION AND REPLACEMENT
3-21
• Remove the cotter pin
3
, pad pin
4
, pad
support
5
and brake pads
6
.
• Connect the transparent hose
7
to the
bleed screw
8
and place the suitable con-
tainer under its end.
• Loosen the bleed screw and push the
caliper piston in.
CC CAUTION:
Do not reuse the drained brake fluid.
• Tighten the bleed screw.
Bleed screw:
6 Nm (0.6 m•kg, 4.3 ft•lb)
U
• Install the brake pads
9
, pad support
0
,
pad pin
¡
and cotter pin
™
.
NOTE:
• Always use a new cotter pin.
• Temporarily tighten the pad pin at this
point.
• Install the caliper
£
and tighten the pad
pin
¢
.
™
Bolt (caliper):
23 Nm (2.3 m•kg, 17 ft•lb)
Pad pin:
18 Nm (1.8 m•kg, 13 ft•lb)
3. Inspect:
• Brake fluid level
Refer to “BRAKE FLUID LEVEL INSPEC-
TION” section.
4. Check:
• Brake pedal operation
A softy or spongy feeling
≥
Bleed brake
system.
Refer to “BRAKE SYSTEM AIR BLEED-
ING” section.
INSP
ADJ