Yamaha TZ250M1, Руководство по эксплуатации для владельца

Страница: 114 / 287

CARBURETOR AND REED VALVE
4-16
9. Install:
• Collar
1
• Jet needle
2
• Spring guide
3
• Spring
4
• Needle holder
5
To throttle valve
6
.
10.Install:
• Throttle cable
1
• Mixing chamber top
2
• Spring (throttle valve)
3
• Ring
4
• Throttle valve
5
NOTE:
• Install the throttle cable (right cylinder) after
passing it through the hole
a
of the induction
cap. Refer to “CABLE ROUTING DIAGRAM”
section in the CHAPTER 2.
• While compressing the spring, connect the
throttle cable.
• Align the projection
b
on the ring with the
groove
c
in the needle holder
6
.
11. Install:
• Mixing chamber top
1
• Screw (mixing chamber top)
2
T
2 Nm (0.2 m
d
kg, 1.4 ft
d
lb)
• Fuel hose
3
To carburetor
4
.
NOTE:
• Install the fuel hose (right cylinder) after pass-
ing it through the hole
a
of the induction cap.
Refer to “CABLE ROUTING DIAGRAM” sec-
tion in the CHAPTER 2.
• After installing, check the throttle grip for
smooth movement.
ENG