Yamaha RX-15, Уполномоченное руководство по продукции

Страница: 36 / 40

ERROR MESSAGES
No machine is unlimited, and from time to time the RX15
may present with an error message indicating that
something has gone wrong—or that you have done
something wrong. The error messages that you are likely
to encounter are as follows:
PTN MEMORY FULL!
This error message will occur during pattern
programming operations, indicating that the RX15 pattern
memory is full and can accept no more data. The
solution to this problem is to create more memory space
by one of the following methods:
1. Delete unwanted patterns.
2. Save the RX15 memory contents onto cassette tape
and then clear the memory using the CLEAR function.
SONG MEMORY FULL
This error message will occur during song programming
operations, indicating that the RX15 song memory is full
and can accept no more data. The solution is to create
more memory space by one of the following methods:
1. Delete unwanted songs.
2. Save the RX15 memory contents onto cassette tape
and then clear the song memory using the CLEAR
function.
WRONG QUANTIZE!
This message will appear if you attempt to use the
SWING function with QUANTIZE set to any value except
1/8 or 1/16. QUANTIZE must be reset, or the SWING
function cancelled to correct this error.
WRONG SIGNATURE!
This message will appear briefly if a pattern CONNECT
COPY operation is attempted, and the combined length
of the patterns to be connected exceeds 100 bars or the
patterns to be connected have different time signatures.
The message will appear for about 2 seconds and the
copy function will be automatically cancelled.
VERIFY ERROR
This message will appear during a cassette verify
operation if an error is detected in the data recorded on
the tape. Re-save the data and verify again.
3 5
LOAD ERROR!
This message indicates that a data error has been
encountered during a cassette load operation. Try
loading again. If the error persists then check all
cassette deck connections and level settings. Cleaning
and demagnetizing the cassette recorder’s heads might
also help.
MIDI DATA ERROR
This message indicates that erroneous data has been
received at the MIDI IN terminal. Such errors are
generally caused at the transmitting equipment-e.g. the
transmitting equipment power is turned OFF or ON while
the RX15 is in the MIDI receive mode. in either case,
check the RX15 MIDI receive parameters to make sure
they are set to match the transmitting device’s
parameters.