Yamaha RX-15, Уполномоченное руководство по продукции

Страница: 19 / 40

Insert (EX: insert new part-pattern 32-
between parts 2 and 3)
Locate part 3 using
(Parts 3 and above all moved up one part)
Continue editing as normal . . . . . . . .
The Delete Function
While in the edit mode, the delete function can be used
to delete parts from a song program. For example, in the
INSERT function description above, we inserted a new
part between parts 2 and 3 in a 4-part program, leaving
us with original parts 1 and 2, new part 3, and original
parts 4 and 5. To delete the part we inserted (currently
part 3), simply locate part 3 using the -1/NO and
+1/YES keys and press the DELETE button. The LCD
panel will respond with “DELETE PART 003?”. If the
+1/YES button is then pressed, part 3 will be deleted
and parts 4 and 5 will be re-written into parts 3 and 4,
leaving us with our 4 original parts. Editing can now
continue as normal. Press - 1/NO in response to the
“DELETE PART 003?” message to cancel the delete
mode.
18
Delete (EX: delete part 3)
Locate part 3 using
Parts 4 and above all moved back one part.
Repeats
The repeat function can save a considerable amount of
programming time by making it possible to repeat any
part or group of parts up to 100 times. The repeat
function is used in the edit mode. Suppose, for example,
we want to repeat part 3 of our 4-part song 3 times (this
means part 3 would be played a total of 4 times—1
original and 3 repeats). Locate part 3 using the -1/NO
and +1/YES buttons and press the REPEAT button. This
does the equivalent of entering a repeat sign
immediately after part 3-that is, part 3 will be the last
part of the repeated segment. The LCD panel will
respond with “GO TO PART *** ?“. The number of the
part which is to be the first part of the repeated segment
is then entered via the white number buttons-in this
case, since we only intend to repeat part 3, enter a “3”.
We could repeat bars 1, 2, and 3, for example, by
entering a “1” instead of a “3” (“GO TO PART 001”).
Press the REPEAT button again and you will be prompted
for the number of repeats: “REP COUNTS ** ?”. The
effective data range is from 01-99. Enter the desired
number of repeats via the white number buttons-in this
case “3”. Press the REPEAT button again to complete
the repeat entry procedure. Now editing can continue as
normal. Note that if you now increment through the
parts, a “REPT for03 to003” message will appear
between parts 3 and 4, indicating that part 3 will be
repeated 3 times. Repeats can be deleted in the same
way as parts by locating this message and using the
delete function (See “The Delete Function”, above).