Yamaha RX-15, Уполномоченное руководство по продукции

Страница: 7 / 40

PRECAUTIONS
l
Avoid placing the RX15 in locations exposed to direct
l
Do not use excessive force in handling control
sunlight or high temperatures, excessively high or low switches and knobs.
humidity, high dust concentration, or vibration.
l
To avoid broken cords and short circuits, be sure to
l
Be sure to connect the RX15 to an AC power supply
that meets the power supply specifications listed on
unplug all connectors by grasping the respective
the rear of the unit.
plugs—NOT the cords.
l
If there is any danger of lightning occurring nearby,
l
Remove the power plug from the AC mains socket if
remove the power plug from the wall socket in
the unit is not to be used for an extended period of
advance.
time.
l
Remove all plugs and connections if the unit is to be
l
Be sure to make all connections properly, as described
in the “CONNECTIONS” section.
transported, to prevent damage to the cords and jacks.
l
Do not use solvents such as benzene or paint thinner
l
To avoid damaging your speakers and other playback to clean the unit. Do not use insecticides or other
equipment, turn off the power of all related equipment
before making connections.
pressurized spray products in proximity to the unit.
Wipe off the exterior with soft cloth.
EFFECTS ON OTHER ELECTRONIC
EQUIPMENT
l
Since this unit incorporates digital circuitry,
simultaneous use of other equipment such as TVs,
radios, etc. in close proximity may cause noise and
erroneous operation. If this occurs, separate the
affected units sufficiently to eliminate the problem. It is
also a good idea to use separate line filters on each
piece of equipment.
CAUTION
l
The RX15 pattern memory locations 00 through 36
contain factory-programmed rhythm patterns when the
unit is shipped. Use the SAVE function (described on
page 21) to save these patterns on cassette tape
before programming your own patterns into these
locations in order to prevent loss of the pre-
programmed patterns.
6