Yamaha RX-15, Уполномоченное руководство по продукции

Страница: 21 / 40

Song Clear (All Songs)
The tempo change must be entered before the repeat.
Basically, the tempo change range is ± 50. Larger
tempo changes can be programmed, however, by
entering two consecutive tempo changes. The only
restriction is that the total tempo range of the RX15 is
from 40 to 250, and no tempo change can exceed these
limits.
Song Clear
Single songs can be cleared by selecting the song to be
cleared and then pressing the CLEAR button. To confirm
your intention to clear the pattern the RX15 LCD panel
will respond with “CLEAR SONG XX ?”—where “XX” is
the number of the selected song. Press the +1/YES
button to clear the song, or the -1/NO button to cancel
the clear function.
Song Clear (Single)
All songs in memory—0 through 9—can be cleared
simultaneously if necessary. This is a “hidden function”
in the sense that it cannot be accessed directly —in
order to prevent accidental erasure of the entire song
memory contents.
First, press the CLEAR button from the song mode. After
the “CLEAR SONG XX ?” display appears,
simultaneously press the ACCENT button and
STOP/CONTINUE button. The LCD panel will respond
with “CLEAR ALL SONGS?” to confirm your intention to
clear all songs. Press +1/YES to clear the song
memory, or press the -1/NO button to cancel the clear
function.
The “clear all songs” function initializes the song
memory, and can be used to restore normal operation
should an operation error cause the RX15 software to
malfunction. Save the song memory contents onto a
cassette tape (see “CASSETTE OPERATIONS” section)
to prevent loss of songs you wish to keep.
2 0