Yamaha PW50W 2007, Руководство по обслуживанию

Страница: 25 / 168

Front wheel axle M10 x 1.25 1 40 4.0 29
Handlebar M8 x 1.25 2 19 1.9 13
Upper bracket — Steering stem M10 x 1.25 1 32 3.2 23
Upper bracket — Inner tube M10 x 1.25 2 32 3.2 23
Lower bracket — Inner tube M8 x 1.25 2 23 2.3 17
Steering nut BC1
Engine mount M10 x 1.25 1 48 4.8 35
Rear wheel axle nut M12 x 1.25 1 60 6.0 43
Rear shock — upper M6 x 1.0 2 11 1.1 8.0
— lower M8 x 1.25 2 23 2.3 17
Swing arm (L) — Engine (Front) M8 x 1.25 3 26 2.6 19 Yamaha bond
No.1215
— Gear housing (Rear) M8 x 1.25 3 26 2.6 19 Yamaha bond
No.1215
Swing arm (R) — Engine (Front) M8 x 1.25 2 29 2.9 21
— Bearing housing (Rear) M8 x 1.25 2 33 3.3 24
Front brake — Cam shaft lever M5 x 0.8 1 4 0.4 2.9
Side cover — Frame M6 x 1.0 2 7 0.7 5.1
Rear brake — Cam shaft lever M5 x 0.8 1 6 0.6 4.3
Housing cover M6 x 1.0 3 9 0.9 6.5
Drive pinion (Screw) M35 x 1.5 1 50 5.0 36
Starter lever M11 x 1.25 1 1 0.1 0.7
Main stand bracket M6 x 1.0 2 15 1.5 11
SPEC
2-9
MAINTENANCE SPECIFICATIONS
Part to be tightened Thread size Q’ty
Tightening
torque
Remarks
Nm m·kg ft·lb
Refer to NOTE
NOTE:
1. First tighten the ring nut to 10 Nm (1.0 m • kg, 7.2 ft • lb). Then, after moving the steering a few
times right and left, loosen the ring rut.
2. Retighten the ring nut to 0.7 Nm (0.07 m• kg, 0.5 ft • lb) by using the torque wrench.
5PG-7-10 23 06.5.16, 17:42:17