Yamaha GRIZZLY 350 YFM35GW Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 134

Yamaha GRIZZLY 350 YFM35GW Скачать руководство пользователя страница 27

4-5

4

WARNING

EWB00250

Malfunction of the throttle could make it diffi-
cult to speed up or slow down when you need
to. This could cause an accident. Check the op-
eration of the throttle lever before you start the
engine. If the throttle does not work smoothly,
check for the cause. Correct the problem be-
fore riding the ATV or consult a Yamaha dealer.

EBU18321

Speed limiter

Your ATV was delivered with an adjustable speed
limiter. The speed limiter keeps the throttle from
fully opening, even when the throttle lever is
pushed to the maximum.

1. Loosen the locknut.
2. To increase the maximum engine power avail-

able and the maximum speed of the ATV, turn
the adjusting screw in direction (a). To de-
crease the maximum engine power available
and the maximum speed of the ATV, turn the
adjusting screw in direction (b).

3. Tighten the locknut.

WARNING

EWB00240

Improper adjustment of the speed limiter and
throttle could cause throttle cable damage or
improper throttle operation. You could lose
control, have an accident or be injured. Do not
turn the adjusting screw out more than 12 mm
(0.47 in) or the throttle cable could be dam-
aged. Always make sure the throttle lever free
play is adjusted to 3.0–5.0 mm (0.12–0.20 in).
(See page 8-23.)

1. Locknut
2. Adjusting screw

3. No more than 12 mm (0.47 in)

U5WH63E0.book Page 5 Monday, May 8, 2006 1:25 PM

«
...
25
26
27
28
29
...
»

Содержание GRIZZLY 350 YFM35GW







































































































































Отзывы:

Нет отзывов