manualshive.com logo in svg

Yamaha E25B, Руководство пользователя

Поделиться
Скачать
Yamaha E25B Скачать руководство пользователя страница 34

Operation

28

EMU37141

Fuel level

Be sure you have plenty of fuel for your trip.
A good rule is to use 1/3 of your fuel to get to
the destination, 1/3 to return, and to keep 1/3
as an emergency reserve. With the boat lev-
el on a trailer or in the water, check the fuel
level. For fuel filling instructions, see page
30.

EMU36571

Remove the top cowling

For the following checks, remove the top
cowling from the bottom cowling. To remove
the top cowling, release the cowling lock le-
ver and lift off the top cowling.

EMU36442

Fuel system

WARNING

EWM00060

Gasoline and its vapors are highly flam-
mable and explosive. Keep away from
sparks, cigarettes, flames, or other sourc-
es of ignition.

WARNING

EWM00910

Leaking fuel can result in fire or explo-
sion.

●

Check for fuel leakage regularly.

●

If any fuel leakage is found, the fuel
system must be repaired by a qualified
mechanic. Improper repairs can make

the outboard unsafe to operate.

EMU36451

Check for fuel leaks

●

Check for fuel leaks or gasoline fumes in
the boat.

●

Check for fuel leakage from the fuel sys-
tem.

●

Check the fuel tank and fuel lines for
cracks, swellings, or other damages.

EMU37321

Checking the fuel filter

Check that the fuel filter is clean and free of
water. If any water is found in the fuel, or if a
significant amount of debris is found, the fuel
tank should be checked and cleaned by a
Yamaha dealer.

EMU36902

Controls

Tiller handle models:

●

Move the tiller handle fully to the left and
right to make sure operation is smooth.

●

Turn the throttle grip from the fully closed
to the fully open position. Make sure that it
turns smoothly and that it completely re-
turns to the fully closed position.

●

Look for loose or damaged connections of
the throttle and shift cables.

Remote control models:

●

Turn the steering wheel full-right and full-
left. Make sure operation is smooth and
unrestricted throughout the whole range
with no binding or excessive free play.

ZMU06084

ZMU06044

69R-9-2A-1E0.book  28 ページ  ２０１０年２月３日　水曜日　午後５時１８分

Содержание E25B











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды