manualshive.com logo in svg

Yamaha E25B, Руководство пользователя

Поделиться
Скачать
Yamaha E25B Скачать руководство пользователя страница 17

Specifications and requirements

11

tions such as poor handling, loss of
control, or fire hazards.

●

Because the motor is very heavy, spe-
cial equipment and training is required
to mount it safely.

Your dealer or other person experienced in
proper rigging should mount the motor using
correct equipment and complete rigging in-
structions. For further information, see page
24.

EMU33581

Remote control requirements

WARNING

EWM01580

●

If the engine starts in gear, the boat can
move suddenly and unexpectedly, pos-
sibly causing a collision or throwing
passengers overboard.

●

If the engine ever starts in gear, the
start-in-gear protection device is not
working correctly and you should dis-
continue using the outboard. Contact
your Yamaha dealer.

The remote control unit must be equipped
with a start-in-gear protection device(s). This
device prevents the engine from starting un-
less it is in neutral.

EMU25694

Battery requirements

EMU25721

Battery specifications

The engine cannot be started if battery volt-
age is too low.

EMU36290

Mounting battery

Mount the battery holder securely in a dry,
well-ventilated, vibration-free location in the
boat. 

WARNING! Do not put flammable

items, or loose heavy or metal objects in
the same compartment as the battery.
Fire, explosion or sparks could result.

[EWM01820]

 

EMU36300

Multiple batteries

To connect multiple batteries, such as for
multiple engine configurations or for an ac-
cessory battery, consult your Yamaha dealer
about battery selection and correct wiring.

EMU25730

Without a rectifier or Rectifier 
Regulator

NOTICE

ECM01090

A battery cannot be connected to models
that do not have a rectifier or Rectifier
Regulator.

If you wish to use a battery with the models
without a rectifier or Rectifier Regulator, in-
stall an optional Rectifier Regulator.
Using a maintenance-free battery with the
above models can shorten the life of the bat-
tery significantly.
Install an optional Rectifier Regulator or use
accessories rated to withstand 18 volts or
higher with the above models. Consult your
Yamaha dealer for details on installing an
optional Rectifier Regulator.

EMU34194

Propeller selection

Next to selecting an outboard motor, select-
ing the right propeller is one of the most im-
portant purchasing decisions a boater can
make. The type, size, and design of your pro-
peller have a direct impact on acceleration,

Minimum cold cranking amps (CCA/EN):

30HW 347.0 A

Minimum rated capacity (20HR/IEC):

30HW 40.0 Ah

69R-9-2A-1E0.book  11 ページ  ２０１０年２月３日　水曜日　午後５時１８分

Содержание E25B











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды