YAKINIKU SHICHIRIN, Инструкция по эксплуатации

Страница: 35 / 124

EN
35
STEP 7 - Attach 4 Silicone caps (D) to the bottom of the Bamboo Heat Shield (6).
STEP 8 - Tighten all screws with a wrench. Then place the Metal Heat Shield (5)
on the stand.
STEP 9 - Place the stand on the Bamboo Heat Shield (6).
STEP 10 - Place the Shichirin in the stand.
6.2. RECTANGULAR SHICHIRIN ASSEMBLY
IMPORTANT! - Remove all packaging before use, but retain the safety instruc-
tions and keep them with this product.
A
B
1
2
4
5
6
C
D
E
3
1
Band (2x)
2
Bamboe Handle (2x)
3
Support (2x)
4
Connector (1x)
5
Metal Heat Shield (1x)
6
Bamboo Heat Shield (1x)
A
Nut (6x)
B
Screw (M6x12) (6x)
C
Screw (5X10) (8x)
D
Washer (6x)
E
Silicone Cap (8x)
STEP 1 - Attach by hand 1 Support (3) to the Connector (4) with an M6 screw (B),
washer (D) and nut (A).
STEP 2 - Repeat step 1 on the other side of the stand.
STEP 3 - Manually fasten the Band (1) to the stand using two M6 screws (B),
2 washers (D) and two nuts (A).
STEP 4 - Repeat step 3 on the other side of the stand.