Yaesu FTM-200DR Скачать руководство пользователя страница 25

Страница: 25 / 67

Using the Voice Guide unit FVS-2

The receive audio can be recorded and then played back later using the optional voice

guide unit “FVS-2”. The frequency of the operating band can also be announced by voice

when the announce function is set to ON.

Mounting the voice guide unit “FVS-2”

Preparations

• Voice guide unit “FVS-2” (optional)

• Phillips screwdriver

Mounting procedure

• Avoid touching the electronic components with your hands as the semiconductors may be

damaged by static electricity.

• Note that labor charges to install optional items by our customer service support staff shall

be separately chargeable.

1.  Turn the transceiver OFF.
2.  Turn the external power supply OFF.
3.  Unplug the control cable, microphone, and DC power supply cables from the main

chassis.

4. Remove the eight screws from the main body, four on

top and two each at the sides.



: Please note that the 2 screws on the front panel side

of the top cover are longer than the other 6 screws.



5. Carefully lift the top cover of the main body.

Do not lift the top cover by force. This may result in

cables connected between the circuit boards and the

speaker inside the cover to be cut.

Speaker Cable

6. Unplug the speaker cables extending from the top cover from the socket on the board

inside the main body before removing the cover.

Hold the connector when unplugging the cable without pulling on the cable itself.

Содержание FTM-200DR




































































Результаты поиска

Содержание FTM-200DR

Отзывы:

Похожие инструкции для FTM-200DR

Бренды по названию

Популярные бренды

Yaesu FTM-200DR, Руководство для продвинутых пользователей

Результаты поиска

Содержание FTM-200DR

Отзывы:

Похожие инструкции для FTM-200DR

Бренды по названию

Популярные бренды