Yaesu FTM-200DR, Руководство для продвинутых пользователей

Страница: 34 / 67

34
DIN 6 pin
PKD (packet data input)
GND
PSK （ PTT ）
RX 9600 (9600 bps packet data output)
RX 1200 (1200 bps packet data output)
PK SQL (squelch control)
• Data cable “CT-167” (optional)
To the transceiver
To the TNC etc.
PKD (packet data input)
GND
PSK （ PTT ）
RX 9600 (9600 bps packet data output)
RX 1200 (1200 bps packet data output)
PK SQL (squelch control)
TXD (serial data output [transceiver

PC])
RXD (serial data input [transceiver
!
PC])
CTS (data communication control)
RTS (data communication control)
Brown PKD (packet data input)
Black thick wire GND
Red PSK (PTT)
Orange RX 9600 (9600 bps packet data output)
Yellow RX 1200 (1200 bps packet data output)
Green PK SQL (squelch control)
Blue TXD (serial data output [transceiver

PC])
Grey RXD (serial data input [transceiver
!
PC])
White CTS (data communication control)
Black RTS (data communication control)
• Make sure to turn the power to the radio OFF before connecting.
• Refer to the TNC operating manual for instruction on connecting the TNC to a personal
computer.
• RF receive interference may occur because of noise occurring in the personal computer.
When signals cannot be received normally, keep the personal computer at a distance away
from the radio and use a photo-coupler and noise filter to connect.
z
Packet communication settings
1. Press and hold the [ F
MENU
] key

[ 66 COM PORT ]

Press the DIAL knob
2. Rotate the DIAL knob to select [ SPEED ] then press the DIAL knob.
3. Rotate the DIAL knob to select the desired communication speed then press the DIAL
knob.
The setting changes in the following order:
4800bps

9600bps

19200bps

38400bps

57600bps
Factory default value: 9600bps
4. Rotate the DIAL knob to select [ OUTPUT ] then press the DIAL knob.
5. Rotate the DIAL knob to select [ PACKET ] then press the DIAL knob.
The setting changes in the following order:
OFF

GPS OUT

PACKET

WAYPOINT
Factory default value: OFF
6. Press the [ SQL
BACK
] key.
7. Rotate the DIAL knob to select [ 67 DATA BAND ] then press the DIAL knob.
8. Rotate the
DIAL
knob to select [
DATA
], then press the
DIAL
knob.