Yaesu FTM-200DR, Руководство для продвинутых пользователей

Страница: 19 / 67

19
4. Rotate the DIAL knob to select [ MEM ] then press the
DIAL knob.
• “
«
”, “ L1 ” and “ L2 ” blink.
• Without the latitude and longitude information, the lo-
cation cannot be registered.
5. Rotate the DIAL knob to select the mark ([
«
], [ L1 ] or [ L2 ]) to register the position
information.
6. Press the DIAL knob.
The location information is registered with the selected mark and navigation starts.
7. Press the [ DISP ] key return to normal operation display.
If you select [ ] (Display of other station) in step 2 above and perform the registration
operation when the location information of the partner station is displayed, you can register
the current latitude and longitude of the partner station as the destination.
z
Using the Back Track Function
1. In the Real-Time Navigation screen, press the [ F
MENU
] key.
2. Rotate the DIAL knob to select the mark ([
«
], [ L1 ] or [ L2 ]) to register the location
information for back tracking.
Marks for which location information has not been registered are displayed in gray.
3. Press the DIAL knob.
• Navigation will start.
• The green point in the compass indicates the direction
of the registration point (departure point), so by
proceeding so that the green point is always on top,
the registration point can be reached. (When the
compass is in heading up display).
4. Press the [
DISP
] key to end the navigation and return to
normal operation display.
z
Description of the BACK TRACK Function Screen
Callsign
Direction to destination
Distance to destination
Heading of this station
H UP: Heading up
N UP: North UP