Yaesu FTM-200DR, Руководство для продвинутых пользователей

Страница: 23 / 67

23
Functions used as needed
Timer / Clock function
1. Press and hold the [ F
MENU
] key

[ 7 DISPLAY MODE ]

Press the DIAL knob
2. Rotate the
DIAL
knob to select [
TIMER/CLOCK
] then press the
DIAL
knob.
The Clock screen will be displayed.
3. The following functions can be selected each time the DIAL knob is pressed after
pressing the [ F (SETUP) ] key.
Clock screen / Lap timer screen / Countdown timer screen
4. Press any key (except Power Switch) or PTT switch to finish the setting and return to
the original screen.
Using the lap timer
1. In the Timer / Clock function screen, press the [ F
MENU
] key.
2. Rotate the
DIAL
knob to select [
MODE
] then press the
DIAL
knob several times to display the TIMER screen.
z
Start measurement
1. Rotate the DIAL knob to select [ START ] then press the
DIAL knob.
The timer will start.
z
Measure lap time
1. Rotate the DIAL knob during measurement and select
[ LAP ].
2. Each time the DIAL knob is pressed, the lap time is
stored.
Up to 99 lap times can be saved in the memory.
z
Call lap time
1. Rotate the DIAL knob to select [ RECALL ] then press the DIAL knob.
The lap time and split time are displayed.
2. When there are multiple lap times, rotate the DIAL knob to select [
p
] or [
q
] then
press the DIAL knob to switch between the lap times.
z
Stop measurement
1. Rotate the DIAL knob to select [ STOP ] then press the DIAL knob.
The timer will stop.
z
Clear the measurement result
1. When measurement is stopped, turn the DIAL knob to select [ RESET ] then press the
DIAL knob.
All measurement results will be erased.