Yaesu FTM-200DR, Руководство для продвинутых пользователей

Страница: 52 / 67

52
31 STEP
Set the frequency step when the tuning knob is turned, or when the key is pressed.
1. Press and hold the [
F
MENU
] key

[ 31 STEP ]

Press the DIAL knob
Refer to the Operating Manual for details.
32 CLOCK TYPE
The CPU clock signal can be changed so that an internal spurious signal is not heard by
the receiver. Select “A” during normal operation.
1. Press and hold the [
F
MENU
] key

[ 32 CLOCK TYPE ]

Press the DIAL knob
2. Rotate the DIAL knob to select the desired setting.
A The clock shift operation will automatically switch ON and OFF.
B The clock shift will always be kept in operation.
33 UNIT
Set the units of measure to display the altitude, distance, and speed.
1. Press and hold the [
F
MENU
] key

[ 33 UNIT ]

Press the DIAL knob
2. Rotate the DIAL knob to select the desired setting.
INCH Display units in the Imperial/USA system.
METRIC Display units in the Metric system.
The default settings depend on the transceiver version.
34 APO
The transceiver can be set to automatically power OFF when there is no operation for a
period.
1. Press and hold the [
F
MENU
] key

[ 34 APO ]

Press the DIAL knob
2. Rotate the
DIAL
knob to select the desired setting.
OFF Does not turn the power OFF automatically.
0.5 hour to 12 hour Turns the power OFF when no operation is performed for a
specified time.
35 GPS DATUM
Set the geodetic GPS positioning standard reference system.
1. Press and hold the [
F
MENU
] key

[ 35 GPS DATUM ]

Press the DIAL knob
2. Rotate the DIAL knob to select the desired setting.
WGS-84 Positions using the global geodetic reference system. This is
being used as a standard all around the world.
TOKYO MEAN Positions using the Japanese geodetic reference system. When
positioning in Japan (Tokyo), the error can be made smaller.
Select “WGS-84” for the normal operation.