Yaesu FTM-200DR, Руководство для продвинутых пользователей

Страница: 58 / 67

58
WP FILTER
Sets the type of beacon to be output when “WAYPOINT” is selected in “OUTPUT”.
1. Rotate the
DIAL knob to select [ WP FILTER ] then press the DIAL knob.
2. Rotate the DIAL to select the beacon type you want to output then press the DIAL
knob.
ALL Outputs all the received beacons.
MOBILE Outputs only mobile station beacons.
FREQUENCY Outputs only the beacons of stations with frequency infor-
mation.
OBJECT/ITEM Outputs only the beacons of object stations or item stations.
DIGIPEATER Outputs only the beacons of digital repeater stations.
VoIP Outputs only beacons of VoIP stations such as WIRES.
WEATHER Outputs only beacons of the weather stations.
YAESU Outputs only beacons of stations using Yaesu transceivers.
CALL RINGER Outputs only the information of call sign ringer stations which
are set from [77 APRS RINGER (CS)] in the APRS Setup menu.
RANGE RINGER Outputs only the information of stations recognized as an
approaching station by the [76 APRS RINGER] range ringer
function in the APRS Setup menu.
67 DATA BAND
Set the operating band of the APRS (internal modem) and data communication (when
using the DATA jack at the back of the main body).
1. Press and hold the [
F
MENU
] key

[ 67 DATA BAND ]

Press the DIAL knob
To transmit and receive APRS or DATA communication on the sub band side (lower side), it
is necessary to set [A-B DUAL RECEIVE] in “50 DUAL RCV MODE”.
APRS
Sets the APRS operating band.
1. Rotate the
DIAL knob to select [ APRS ] then press the DIAL knob.
2. Rotate the DIAL to select the APRS operating band, then press the DIAL knob.
MAIN BAND The main band will be selected.
SUB BAND The sub-band will be selected.
A-BAND FIX The upper band will be selected.
B-BAND FIX The lower band will be selected.
DATA
Sets the data transmission operating band.
1. Rotate the
DIAL knob to select [ DATA ] then press the DIAL knob.
2. Rotate the
DIAL
to select the DATA communication operating band, then press
the
DIAL
knob.