Yaesu FT-818ND Скачать руководство пользователя страница 75

Страница: 75 / 76

1. Changes or modifications to this device not expressly approved by YAESU MUSEN could

void the user’s authorization to operate this device.

2. This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions; (1) This device may not cause harmful interference, and (2) this device must

accept any interference including received, interference that may cause undesired operation.

3. The scanning receiver in this equipment is incapable of tuning, or readily being altered, by

the User to operate within the frequency bands allocated to the Domestic public Cellular

Telecommunications Service in Part 22.

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference,

and (2) this device must accept any interference, including interference that may cause

undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil

ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

WARNING:

MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE

SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW.

DECLARATION BY MANUFACTURER

The Scanner receiver is not a digital scanner and is incapable of being converted or modified to

a digital scanner receiver by any user.

EU Declaration of Conformity

We, Yaesu Musen Co. Ltd of Tokyo, Japan, hereby declare that this radio equipment FT-818 is in

full compliance with EU Radio Equipment Directive 2014/53/EU. The full text of the Declaration of

Conformity for this product is available to view at http://www.yaesu.com/jp/red

ATTENTION – Conditions of usage

This transceiver works on frequencies that are regulated

and not permitted to be used without authorisation in the

EU countries shown in this table. Users of this equipment

should check with their local spectrum management

authority for licensing conditions applicable for this

equipment.

–

Disposal of Electronic and Electrical Equipment

Products with the symbol (crossed-out wheeled bin) cannot be disposed as

household waste.

Electronic and Electrical Equipment should be recycled at a facility capable of

handling these items and their waste by-products.

Please contact a local equipment supplier representative or service center for

information about the waste collection system in your country.

Содержание FT-818ND













































































Результаты поиска

Содержание FT-818ND

Отзывы:

Похожие инструкции для FT-818ND

Бренды по названию

Популярные бренды

Yaesu FT-818ND, Руководство по эксплуатации

Результаты поиска

Содержание FT-818ND

Отзывы:

Похожие инструкции для FT-818ND

Бренды по названию

Популярные бренды