Yaesu FT-818ND Скачать руководство пользователя страница 61

Страница: 61 / 76

Menu Operation

Menu Item 32 [LOCK MODE]

Function

: Select the operation of the front panel’s

key.

Available Values

: DIAL/FREQ/PANEL

Default

: DIAL

DIAL: Locks knob only
FREQ: Locks front panel keys and knobs related to frequency control (such as

and

key,

B) key., etc.)

PANEL: Locks all front keys and knobs (except

key and

key)

Menu Item 33 [MAIN STEP]

Function

: Setting of the

knob’s tuning speed.

Available Values

: FINE/COARSE

Default

: FINE

You may choose between two speeds for the

knob. Selecting “COARSE” doubles

the tuning rate compared to the default value.

Menu Item 34 [MEM GROUP]

Function

: Enable/disable the memory grouping feature

Available Values

: OFF/ON

Default

: OFF

When this Menu Item is set to “ON,” the 200 “standard” memory channels are partitioned
into ten Memory Groups, each holding up to 20 memory channels.

Menu Item 35 [MEM TAG]

Function

: Store Alpha-Numeric “Tags” for the memory channels.

Up to eight characters may be stored. The storage procedure is as follows:

1.  Recall the memory channel on which you wish to append a label.
2.  Recall this Menu Item [Menu #35 (MEM TAG)].
3.  Press the

knob momentarily to initiate storing of the Tag (an under-bar will

appear below the first character location).

4. Rotate the

knob to select the first character (number, letter, or symbol) in the

name you with to store, then rotate the

knob clockwise to move to the next

character.

5. Again rotate the

knob to select the next number, letter, or symbol, then rotate

the

knob clockwise to move to the next character’s slot.

6. Repeat step 5 as many times as necessary to complete the name tag for the mem-

ory.

7. Press the

knob to save the A/N (Alpha-Numeric) Tag and exit.

Menu Item 36 [MIC KEY]

Function

: Enable/disable CW keying by the microphone’s [

]/[

DWN

] keys.

Available Values

: OFF/ON

Default

: OFF

When this Menu Item is set to “ON,” press the microphone’s [

] key to send a “dot,” and

press the microphone’s [

DWN

] key to send a “dash” (while the built-in electronic keyer is

engaged).

Содержание FT-818ND













































































Результаты поиска

Содержание FT-818ND

Отзывы:

Похожие инструкции для FT-818ND

Бренды по названию

Популярные бренды

Yaesu FT-818ND, Руководство по эксплуатации

Результаты поиска

Содержание FT-818ND

Отзывы:

Похожие инструкции для FT-818ND

Бренды по названию

Популярные бренды