Yaesu FT-818ND Скачать руководство пользователя страница 38

Страница: 38 / 76

Transmitter Operation

“USER” Defined Digital Modes

Also provided in the

FT-818

are two convenient “USER” Digital modes, one each providing

USB- and LSB-side injection, which may be used for SSTV, Fax, Pactor, and other digital
operating modes.

Here is an example involving the configuration of the USER mode for RTTY with USB-side

injection (as opposed to LSB injection, used in the default “RTTY” mode):
1. Use Menu #26 to set the Digital mode to “USER-U”.
2. Press the

key, as needed, to select the DIG mode (the “DIG”

icon will appear on the display).

3. Now use Menu #27 to configure the transceiver’s passband response. Once in the

Menu mode, rotate the

knob to select Menu #27 (DIG SHIFT), and rotate the

knob to set the desired BFO offset (depending on how your TNC’s tones are set

up). For typical high-frequency tone use, a setting of about “+2100” will be a good start-
ing point.

4. Finally, depending on how you wish the display to respond, you may program in a cor-

responding display shift, using Menu #24 (DIG DISP). Remember to press and hold in
the key for one second when exiting the Menu mode.

5. The setup of the AFSK drive level is identical to that described previously for RTTY op-

eration.

The USER-L and USER-U Digital modes should allow you to operate on any SSB-

based AFSK Digital mode. Note that the “PSK31” configurations will also work well

for many Digital operating situations.

Содержание FT-818ND













































































Результаты поиска

Содержание FT-818ND

Отзывы:

Похожие инструкции для FT-818ND

Бренды по названию

Популярные бренды

Yaesu FT-818ND, Руководство по эксплуатации

Результаты поиска

Содержание FT-818ND

Отзывы:

Похожие инструкции для FT-818ND

Бренды по названию

Популярные бренды