Xylem SonTek FlowTracker2, Руководство пользователя

Страница: 282 / 308

SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
281
removed, all three measurements associated with this station will be removed
(0.2, 0.6, and 0.8). Please consult the rules specific to each measurement type.
•
Revert to Original – Revert to original values associated with the station when
the data file was downloaded from the FlowTracker unit.
After any changes to these editable values, click the Apply Changes button. Discharge
will be recalculated and new values will be appearing in the appropriate areas.
Editing Supplemental Data 14.9.4
Supplemental data can be added or edited after the measurement is taken and the file is
closed in the handheld device. To add or edit supplemental data, first navigate to the
Supplemental Data tab (
Figure 14:31 ). To edit existing supplemental data, simply
double click on the field you wish to edit, and enter in a new value. To add a line of
supplemental data, click the Add Supplemental Data button. To add additional lines of
supplemental data, use the green up/down arrows to add rows above/below the current
line, respectively.
14.10. Data Export and File Formats
The FlowTracker2 data can be exported from the FlowTracker2 desktop software in
either PDF or ASCII format. The FlowTracker2 measurement file created on the
handheld is JSON format and contains all the raw data and measurement results.
Export Discharge Summary to PDF 14.10.1
To export the Discharge Summary to PDF, navigate to the Summary tab and click the
Save PDF of Summary button. A PDF will be produced and opened using a PDF
viewer the user has installed on the computer. An example of a discharge summary is
shown in
Figure 14:38 . The user can then choose to save or print the PDF file.