Xylem SonTek FlowTracker2 Скачать руководство пользователя страница 22

Страница: 22 / 308

SonTek – a Xylem brand

FlowTracker2 User’s Manual (January 2019)

System Operation

Section 2.

The

System Operation

section describes the keypad interface, handheld software

menus and the LCD display.

2.1. On/Off Switch

The On/Off power button

for the FlowTracker2 can be accessed on the right side of

the keypad, 3

row from the top.

a) Start system, hold the power button until the LCD screen turns on.
b) Shutdown system, hold the power button until a message is displayed to shut

down the handheld.

c) Activate sleep mode, press the power button once shutdown.
d) Wakeup system, press any button on keypad.

It’s good practice to remove the battery cartridge at the end of each workday for
inspection and charging/replacement.

If the system is not used or stored for long periods, remove the batteries to prevent
unnecessary draining and potential battery leakage.

2.2. Keypad

Navigation Keys

– The handheld has a number of keys

that are assigned to operate handheld software. The
following keys are available for the user to either
navigate or select options in the software,

i).

Left Soft Key

– The text directly above the soft key is

associated with the key operations and allows the
user to perform the following actions,

•

return to previous menu,

•

select action based on text displayed,

•

restart or cancel current operation.

ii).

Right Soft Key

- The text directly above the soft key

is associated with the key operations and allows the
user to perform the following actions,

•

start a new measurement,

•

accept data entry or operation,

•

create new template,

•

access the quality control menu.

iii).

Left & Right arrow

– The key allows the user to

perform the following actions,

Figure 2:1 - Keypad

Layout

Содержание SonTek FlowTracker2





















































































































































































































































































































Результаты поиска

Содержание SonTek FlowTracker2

Отзывы:

Бренды по названию

Популярные бренды

Xylem SonTek FlowTracker2, Руководство пользователя

Результаты поиска

Содержание SonTek FlowTracker2

Отзывы:

Бренды по названию

Популярные бренды