Xylem SonTek FlowTracker2, Руководство пользователя

Страница: 141 / 308

SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
140
Step 4
Measurement screen display the point velocity
measurements required at each fractional depth, e.g.,
the fractional depths for the two point method at
station 2m with a water depth of 1m are the following,
•
0.2 x water depth, 0.2m
•
0.8 x water depth, 0.8m
a) To select a fractional measurement depth,
i). Use the up or down arrow key to scroll through
the measurement options,
b) To continue to velocity measurement,
i). Press the enter key.
c) To open data collection menu,
i). Press the Right Soft Key.
d) To REVERT to add station screen,
i). Press the Left Soft Key.
Figure 8:32 - Measurements
The order in how the point velocity measurements are performed at each fractional
depth is not set and the user can perform the measurements in any order. The
software will start at the bottom of each station for pressure sensor measurements.
Station 1 2 3 4 5 6 7
0.2
0.8
Step 5
Setting Fractional Depth screen allow the setting
and placement of the wading rod before velocity
measurement is started,
a) Pressure Sensor Depth Guide,
b) Beam Check,
c) SNR,
d) Tilt,
e) Velocity angle.
f) To start a velocity measurement,
i). Press the Right Soft Key.
g) To REVERT to measurement screen,
i). Press the Left Soft Key.
Figure 8:33 - Setting
Fractional Depth
The key features of the Setting Fractional Depth are explained in
Figure 8:34
.