Xylem FLYGT MAS 711, Инструкция по установке, эксплуатации и обслуживанию

Страница: 51 / 72

7.3.6 View the pump information
1. Go to the Dataplate info 1.2 menu.
2. Press OK.
The Serial number 1.2.1 menu opens.
3. Press the right arrow button.
The operator panel shows the serial number.
4. Press the down arrow button in steps.
The operator panel shows the other items on the data plate.
7.3.7 View the status of the digital ports
1. Go to the Digital I/O ports 1.23 menu.
2. Press OK.
The Run input 1.23.1 menu shows On or Off.
3. Press the down arrow button in steps.
The operator panel shows the status for the other ports:
– Reset input
– A alarm relay
– B alarm relay
– Go relay
7.3.8 View the data from the power analyzer
1. Go to the Power analyzer 1.24 menu.
2. Press OK.
The Pump voltage ph 1 1.24.1 menu shows the present status.
3. Press the down arrow button in steps.
The operator panel shows the other information menus:
– Pump voltage ph 2
– Pump votlage ph 3
– Pump current ph 1
– Pump current ph 2
– Pump current ph 3
– Pump current mean
– System voltage
– System power
– System power factor
– Total energy counter
7.3.9 Set the service interval
1. Go to the Service interval 2.5.2 menu.
2. Press OK.
3. Press the down arrow button and the OK button to go to the settings.
At number of starts 2.5.2.1 At running time 2.5.2.2 in
hours
At date 2.5.2.3
Service every sets the
interval
2.5.2.1.1 2.5.2.2.1 -
Present reading 2.5.2.1.2 2.5.2.2.2 -
Next service at 2.5.2.1.3 2.5.2.2.3 2.5.2.3.1
Service function
Inactive or Active 2.5.2.1.4 2.5.2.2.4 2.5.2.3.2
7 Operation
MAS 711 Installation, Operation, and Maintenance Manual 49