Xylem FLYGT MAS 711, Инструкция по установке, эксплуатации и обслуживанию

Страница: 35 / 72

4. Press OK.
The Change password 2.4 menu opens.
5. Press OK to enter the edit mode.
The first position of the password flashes.
6. Press the up and down arrow button to enter the digit and the right arrow button to
move to the next position.
7. Press OK to confirm the change.
Save value? appears.
8. Press OK.
Value saved! appears.
6.9.3 Set the date, time, unit, and MAS id
1. Go to the General config 2.5 menu.
2. Set the time and date.
a) Press OK.
The Clock 2.5.1 menu opens and shows the present date and time.
b) Press OK to enter the edit mode.
The first position of the year flashes.
c) Press the up and down arrow button to enter a digit and the right arrow button to
move to the next position.
d) Press OK to confirm the date and time.
Save value? appears.
e) Press OK.
Value saved! appears.
f)
3. Set the temperature unit.
a) Press the down arrow button to go to the Temperature unit 2.5.3 menu.
b) Press OK to enter the edit mode.
The default is °C and the alternative is °F.
c) Press OK to confirm the unit.
Save value? appears.
d) Press OK.
Value saved! appears.
4. Set the MAS id.
a) Press the down arrow button to reach the MAS id 2.5.4 menu.
b) Enter the identification number with the arrow buttons.
c) Press OK to confirm the id.
Save value? appears.
d) Press OK.
Value saved!
6.9.4 Get the sensor information from the pump memory
1. Turn on the pump memory.
a) Go to the General config 2.5 menu.
b) Press OK.
c) Press the down arrow button to go to the Pump memory 2.5.5 menu.
d) Press OK to enter the edit mode.
e) Select Active.
f) Press OK to confirm.
6 System Setup
MAS 711 Installation, Operation, and Maintenance Manual 33