•
CHAPER
1
TABLE OF CONTENTS
TITLE
P
A
G
E
INTRODUCTION
1.1
Product Overview
1-1
1.2
Carrier Card Installation
1-2
1.2.1
XVME-956/1/12 Carrier Card Jumpering
for XVME-684, -686, -687, and -688
1-2
1.2.2
Attaching the XVME-956/1 to the XVME-PC/AT
1-4
1.2.2.1
Connecting the XVME-956 Carrier Card to the XVME-PC/AT and
Installing into the VMEbus Rack
1-4
1.2.2.2
Installing the Inter-Board Connector
1-7
1.2.3
Attaching the XVME-956/12 to the XVME-PC/AT
1-9
1.2.4
Installing an XVME-956/12 Module onto an XVME-956/12 or 957/1x
1-12
1.2.5
Installing an XVME-956/3 onto an XVME-PC/AT Module
1-14
1.3
Module Installation
1-15
1.3.1
Installing Type A Module Assembly to the XVME-956/1 and /12
1-16
1.3.2
Installing Type B Module Assembly to the XVME-956/1 and 956/12
1-17
1.3.3
Installing Type A Module Assembly to XVME-956/3
1-18
1.3.4
Installing Type B Module Assembly
to
XVME-956/3
1-19
1.4
Specifications
1-20
2
ETHERNET INSTALLATION (XVME-956/401)
2.1
Introduction
2-1
2.2
Installation
2-1
2.2.1
Component Installation
2-2
2.2.2
Jumper Settings
2-2
2.2.2.1
I/O Address and ROM Address Selection (W1)
2-2
2.2.2.2
IRQ
Select (W2)
2-4
2.3
I/O Connector and Cable
2-5
2.4
Front Panel Installation
2-5
2.5
Hardware Considerations
2-5
2.5.1
Cables and Connectors
2-7
2.5.2
Configuration Rules
2-7
2.5.3
Termination Requirements
2-8
2.6
Software Considerations
2-8
2.6.1
Using Network Operating Systems
2-8
2.6.2
Using NetBIOS
2-8
2.7
Specifications
2-9
•
•
