7.2 REMOTE PLAYBACK
7.2.1 Remote Playback Server
Configuration
For the remote playback function, you should first
enable WebCam Service and Remote Playback
Service in Basic Configuration (refer to Fig 4.1
and Fig 7.9).
RPB Port
The default value is 13551
Once the remote playback service has been
enabled, there will be an icon on the taskbar to
remind users the service has been activated.
7.2.2 Remote Playback Client-side Setup
You should also first download and install
playback program. To do this, input the PC or
laptop’s IP address in IE browser, select ‘Remote
playback’ and click ‘OK’,
For details on the installation process refer to
Chapter 7.1.2.
After installation, the playback client-side main
interface will appear as shown in Fig 7.12.
34
XUSB4DVR User Guide
Fig 7.9 Remote Playback Service configuration
Please Note:
Uses can enable remote playback service without running the SmartDVR. Just enter the installation
folder of SmartDVR, and activate MediaServer, users can also enable the RPB service.
Fig7.10 Remote
Playback Service
activated
Fig 7.11 Remote surveillance and playback services selection
Please Note:
If users have already installed the
client-side program before inputting the IP address
in the IE browser, the system will automatically
skip the installation.
Fig 7.12 Remote playback client-side main interface
Содержание XUSB4DVR
Страница 48: ...Function Trees 48 XUSB4DVR User Guide APPENDIX 3...
Страница 49: ...Function Trees continued 49 XUSB4DVR User Guide...
Страница 50: ...Function Trees continued 50 XUSB4DVR User Guide...
Страница 51: ...Notes 51 XUSB4DVR User Guide APPENDIX 4...
