XRN Quick Setup Guide
PRO
8
www.xvision.com
1. When the lid is removed you will see silver racks. Remove the Red SATA cables, SATA power Molex and
the screw bag from your accessories box which came with your XRN2016/3625 as pictured below.
2.4 XRN2016/3625 HDD Install
2. Take out your screw driver and remove the screws holding the rack in place.
3. The XRN2016 will have one level and the XRN3625 will have two levels for mounting hard drives. Place
your hard drive on the underside of the rack (shown below) and secure in place using the screws that came
in the accessory box.
4. Once in place, connect your SATA and Molex cable to the hard drove and your XRN motherboard.
Please Note
The user needs to be familiar with handling hard drives or get a qualified person to install. Y3K will not be
liable for any damage caused to the unit in the process of installation.