XRN Quick Setup Guide
PRO
16
www.xvision.com
1. Click “√” in front of “Enable” option at the channel item you wish to add.
2. Select relevant protocol for our cameras it is I8 or you can use Onvif.
3. Input the IP address
4. Input the port number
5. Input the user name
6. Input the IP Cameras password,
7. Finally click “Save”
5.3 Manual Add
Please Note
You must add the user name and password if the IP camera requires this, or you will get no image.
5.4 Camera Setting Adjust
To change any of the settings on the IP camera automatically, double-click the IP cameras in the left window
to access the parameters. Then input relevant changes and click ‘Save’ to finish. The following parameters
can be changed on the unit:
• Enable: Select the relevant channel, check “Enable”
• Protocol: ONVIF Standard protocol/ I8 Private protocol/ I9 Private protocol/ RTSP Standard protocol for
selection
• IP Add: Edit and modify the IP address manually
• Port: Edit and set the relevant port number
• Stream Type: Select “Main Stream” or “Sub Stream”
• Network Type: Select “TCP” or “UDP”
• User: Input the user name
• Password: Fill the password in the password field
