XRN Quick Setup Guide
PRO
22
www.xvision.com
Set Pre and Post Recording by selecting the advanced button. as shown in the picture below.
The IP camera must support motion detection to use this function.
Modify each video channel parameters on the “Motion” interface, as shown below.
1. Click “√” in front of “Enable Motion Detection
2. Set motion areas, Left click and drag on your mouse to select the motion area, you will be left with
squares as shown below. To remove an area use the right button and drag on your mouse.
The motion area us enabled across all the XR cameras by default.
5.7.2 Advance Record
5.7.3 Motion Detection
Please Note