XRN Quick Setup Guide
PRO
13
www.xvision.com
In the picture the below IPv4 also gives you an IP address of 192.168.1.150. This address is the IP address
of the computer which is used in the example. Please make a note of what the default gateway and subnet
mask is. In this example the default gateway is 192.168.1.1 and subnet mask is 255.255.255.0.
In the command prompt type in ping and then an IP address within the range of you network
(i.e.192.168.0.X or 192.168.1.X), then press enter. You can pick any number between 192.168.1.2 and
192.168.1.253.
If the IP address is free, a message will display with Destination host unreachable from your IP address as
shown in the picture below.
If the IP address is in use there will be a reply from that IP address. The example below shows a reply if you
was to ping command with the routers IP address.
When the IP address is available you will need to navigate back to the XRN. Right click your mouse and
select Network Setting. Now fill in the fields as follows;
IP – 192.168.1.100
Subnet Mask – 255.255.255.0
Default Gateway – 192.168.1.1
This will be already set as shown in section 3 (Setup Wizard), so you will just need to connect your CAT5
Ethernet patch cable.
Click the save button at the top of the window, and you should receive the message saying the saving was
successful.