XVision X100R, Руководство пользователя, Страница: 38 / 129

31
6.6.4
RS232
RS232 interface is shown as below. There are five items. See Figure 6-24.

Function: There are various devices for you to select. Console is for you to use the COM or
mini-end software to upgrade or debug the program. The control keyboard is for you to
control the device via the special keyboard. Transparent COM (adapter) is to connect to the
PC to transfer data directly. Protocol COM is for card overlay function. Network keyboard is
for you to use the special keyboard to control the device. PTZ matrix is to connect to the
peripheral matrix control.

Baud rate: You can select proper baud rate.

Data bit: You can select proper data bit. The value ranges from 5 to 8.

Stop bit: There are three values: 1/1.5/2.

Parity: there are five choices: none/odd/even/space mark.
System default setup is:

Function: Console

Baud rate:115200

Data bit:8

Stop bit:1

Parity: None
After completing all the setups please click save button, system goes back to the previous menu.
Figure 6-24
6.6.5 Network
Here is for you to input network information. See Figure 6-25.

IP address: Here you can input IP address.

DHCP: It is to auto search IP. When enable DHCP function, you can not modify IP/Subnet
mask /Gateway. These values are from DHCP function. If you have not enabled DHCP
function, IP/Subnet mask/Gateway display as zero. You need to disable DHCP function to
view current IP information. Besides, when PPPoE is operating, you can not modify
IP/Subnet mask /Gateway.

TCP port: Default value is 37777.

UDP port: Default value is 37778.

HTTP port: Default value is 80.

RTSP port: Default value is 554.

Max connection: system support maximal 20 users. 0 means there is no connection limit.

Preferred DNS server: DNS server IP address.

Alternate DNS server: DNS server alternate address.