27
Version 1 – GBR (11/05/2022)
D-502-0260
3.10.
Electrical parameters shown on the curtain
4.
Regulation
4.1.
General Information – Safety
-
Only qualified persons with valid authorization and knowledge of the relevant standards and directives may
carry out the wiring of the control elements. Before starting any installation work, it is necessary to switch
off the power supply. During the installation, the switch must be secured against being switched on again
by an unauthorised person.
-
Before starting the installation of the control elements and connecting the wiring, read the original
documentation of the individual elements
4.2.
Description of regulation
-
The regulation is used to connect the supply voltage, control elements and set the functionality of the
curtain according to the customer's requirements.
-
Curtain control - regulation enables:
o
setting the shielding level (see 4.2.8.1.) according to the size of the shielded opening, taking into
account local conditions. Factory setting for the shielding level 1. - designed for a curtain with the size
of 2,5 m.
o
door contact connection (included in the curtain delivery) for open/closed door detection
o
heating control - desired temperature according to selected modes (see 4.2.3.) by wireless room
thermostat (part of delivery of electric version BR-xx-ACE1-xxx and water version BR-xx-ACV1-xxx)
o
water version (BR-xx-ACV1-xxx) actuator connection, thermal head
o
setting the delayed curtain switching-off (see 4.2.8.2.) according to the frequency of passes through
the curtain (door). Factory setting of delayed switching-off approx 10 s after closing the door.
o
Pairing of one wireless room thermostat with multiple curtains (see 4.2.4.)
Wireless receiver - pairing buttons
Setting of delayed curtain switching-off
Terminals for door contact connection
Adjusting the curtain level
Magnetic door contact
Fig. 36
Fig. 37