16
Version 1 – GBR (11/05/2022)
D-502-0260
-
Reinstall the sidewall / regulation cover on the curtain and secure with M6x20 screw
-
Position the curtain and slide it onto the base guide rails
-
Secure the curtain to the base with 6 self-tapping screws
Ø
3.5x9.5 (included in the "BREEZE-BASE" base
package) against falling.
-
In the case of the water exchanger version (BR1-xx-ACV1S-xxx), connect the water exchanger
-
If necessary, cover the water and cable inlets with the BREEZE-COVER (accessory
3.3.
Vertical installation - chained curtains
-
Vertical chaining of curtains is allowed up to a maximum height of 4 m
-
By chaining - connecting the curtains to each other, it is possible to create an optimum assembly for the
correct shielding of the required opening based on its dimensions.
-
The correct height of the chained assembly must be at least 100 mm longer than the actual height of the
shielded opening.
-
The curtains are chained using the "BREEZE-CONNECT" connecting part (to be ordered as an accessory).
3.3.1.
Installation of chained curtains
-
Vertically chained curtains shall have the orientation of the media facing away from each other to
ensure access to the media after the curtains are installed.
-
remove the sidewall lids that come into contact with each other - towards each other.
o
Unscrew the M6x20 locking screw from the sidewall
o
Remove the sidewall lid
Fig. 13
Fig. 14
