Xtreme XR1255 Скачать руководство пользователя страница 57

Страница: 57 / 82

Operation Manual

Operation

Warning

Use proper safety procedures and avoid

hazardous situations while operating the

forklift to prevent death, serious injury, or

property damage.

• Check the work site for any hazards before

operating the forklift.

•

Check the work surface for loose soil conditions and

overhead power lines.

Starting Travel

Warning

To prevent death or serious injury, the

operator must be seated with seat belt

fastened, the travel select lever set to

NEUTRAL, the Parking Brake ON (engaged),

and the area free of people and obstructions

BEFORE starting the forklift.

1. Start the forklift. Refer to the Starting Forklift section in

this manual.

2. Apply service brake.

3. Release parking brake.

4. Move the travel select lever to FORWARD or REVERSE for

the appropriate direction of travel.

5. Release the service brake pedal.

6. Slowly press the accelerator pedal to start travel.

Stopping Travel

1. Stop the forklift by applying the service brake pedal.

2. Slow the forklift until it comes to a complete stop.

3. Move the travel select lever to NEUTRAL (N).

4. Set the parking brake to ON (engaged).

Warning

To prevent death, serious injury, or property

damage, apply service brakes until the forklift

comes to a complete stop, move travel select

lever to NEUTRAL (N), set the Parking Brake

switch to ON (engaged), lower and retract the

boom, and shut off the engine before exiting the forklift.

Warning

Make sure the forklift comes to a complete

stop before moving the travel select lever. A

sudden change in direction of travel, while

carrying a load, can reduce stability and/

or cause the load to shift or fall, which could

result in death, serious injury, or property damage.

Changing Travel Direction

1. Stop the forklift by applying the service brake pedal.

2. Move the travel select lever to FORWARD or REVERSE.

3. Release the service brake pedal.

4. Slowly press the accelerator pedal to start travel.

Shut Down Procedure

1. Park forklift on level ground, if possible.

2. Stop the forklift by applying the service brake pedal.

3. Place the travel select lever in NEUTRAL (N) and set the

parking brake to ON (engaged).

4. Lower the boom and rest carriage on ground.

5. Turn the ignition key to OFF and remove the key.

6. If the forklift is parked on an incline, block the wheels.

Warning Indicators and Gauges

Warning

Check warning indicators and gauges on the

dash panel frequently during operation. If a

warning indicator is illuminated or a gauge

shows abnormal readings, stop the forklift,

follow proper shut down procedures, tag the

forklift with “Do Not Operate” tags, and have a qualified

mechanic service or repair the forklift BEFORE placing it

into service again. Ignoring warning indicators can cause

improper performance, which could result in death, serious

injury, or property damage.

There are three (3) warning indicator lights on the dash panel

that illuminate during critical circumstances. All three (3)

warning indicators demand immediate attention and forklift

servicing. In many cases the forklift should be shut down as

soon as practical to prevent serious mechanical failure.
The hydraulic oil temperature indicator illuminates when

the oil temperature is above 180°F. Stop and idle the engine,

allowing time for cooling. If the indicator does not go out after

five (5) minutes, shut the engine down.

Содержание XR1255



















































































Результаты поиска

Содержание XR1255

Отзывы:

Похожие инструкции для XR1255

Бренды по названию

Популярные бренды

Xtreme XR1255, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR1255

Отзывы:

Похожие инструкции для XR1255

Бренды по названию

Популярные бренды