Xtreme XR1255 Скачать руководство пользователя страница 48

Страница: 48 / 82

Operation Manual

Operation

Warning

Wear appropriate protective clothing. Personal protective

equipment can include, but is not limited to hardhat,

gloves, footwear, safety glasses or goggles, and hearing

protection. Make sure clothing is snug and properly belted.

DO NOT wear loose clothing, jewelry, watches, or anything

that can catch on forklift controls, moving parts, etc. Failure

to wear the proper protective clothing could result in death

or serious injury.

Perform a pre-operation inspection and

functional tests at the beginning of each work

shift. Perform the pre-operation inspection

first. DO NOT perform the pre-operation

inspection with the engine running or hot.

Contact with moving or heated parts could cause death or

serious injury.

Perform a pre-operation inspection and

functional tests in an open area.

Become familiar with all safety and hazard la-

bels, regulations, and procedures. Make sure

all proper labels are attached to the forklift

and remain legible.

Remove forklift from service and place “Do

Not Operate” tags on the Starter switch and

steering wheel if anything is found to be in

need of repair or maintenance, defective, or

unsafe in any way.

Contact with hot surfaces and the exhaust

pipe after the forklift has been operated

could result in serious personal injury.

Caution

Warning

Always check the condition of the seat belt

and mounting hardware before operating the

forklift. If the seat belt or mounting hardware

is defective, it may not properly restrain the

operator, resulting in death or serious injury.

•

DO NOT operate the forklift until the seat belt or mount-

ing hardware is replaced, if worn or damaged.

•

The seat belt MUST be worn while operating the

forklift. Failure to wear the seat belt could result in

death or serious injury.

Pre-Operation Inspection

To perform the pre-operation inspection make sure the

forklift is NOT running, the engine is cool, the forklift is parked

on level ground, the boom is completely retracted, and the

frame is level.

NOTE: Copy and use the Pre-Operation Inspection Checklist

in this section.

Operation

Check hydraulic oil lines, tubes,

and hoses carefully. DO NOT

use your bare hand to check for

leaks. Always use a board or

cardboard when checking for

a hydraulic leak. Escaping hydraulic fluid under pressure,

even a pinhole size leak, can penetrate body tissue, which

could cause death or serious injury. If hydraulic oil is inject-

ed into your skin, a doctor familiar with this type of injury

must treat it immediately.

Serious injury could result from

hydraulic oil pressure or hot

oil. DO NOT remove a hydrau-

lic tank filler cap unless it is

cool enough to touch with bare

hands. Remove the hydraulic tank filler cap slowly to relieve

pressure. Relieve all pressure in a hydraulic system before

any caps, lines, fittings, or related items are disconnected

or removed.

Never remove the radiator cap while the engine is hot. The

cooling system is under pressure. Hot coolant could cause

severe burns or eye injury. Wear protective clothing and

safety glasses.

Содержание XR1255



















































































Результаты поиска

Содержание XR1255

Отзывы:

Похожие инструкции для XR1255

Бренды по названию

Популярные бренды

Xtreme XR1255, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR1255

Отзывы:

Похожие инструкции для XR1255

Бренды по названию

Популярные бренды