Xtreme XR1255 Скачать руководство пользователя страница 54

Страница: 54 / 82

Operation Manual

Operation

Normal Starting

Starting Forklift

Warning

To prevent death, serious injury, or prop-

erty damage, the operator must be seated

with seat belt fastened, arms, legs, and head

completely inside the Rollover Protection

Structure/Falling Object Protection Struc-

ture (ROPS/FOPS), the travel select lever in NEUTRAL, and

the Parking Brake switch ON (engaged) BEFORE starting the

forklift.

1. Place Key in Ignition Switch.

Figure 61. Key and Ignition Switch

3. Turn the key to the START position to crank the engine.

Caution

Release the key immediately once the motor starts. If the

motor does not start, DO NOT crank the starter motor con-

tinuously for more than 15 seconds. Failure to release the

key after the motor has started or continuous cranking can

damage the starter motor.

NOTE: The Start position is spring-loaded. When the key is

released, the ignition switch will automatically return to the

RUN position.

NOTE: If the engine fails to start on the first try, wait until the

engine and starter come to a complete stop before cranking

the engine again.

2. To start the engine, turn key in ignition switch clockwise

to the RUN position and wait until the Glow Plugs Wait to

Start Indicator (LED) goes off.

Figure 62. Wait until the Glow Plugs Wait to Start Indicator

(LED) goes off

4. Release key immediately after the engine starts. The

Ignition Switch will automatically return to RUN.

5. After the engine starts, allow the engine to idle for

approximately 60 seconds.

6. Apply the service brake pedal and disengage the Parking

Brake switch.

Содержание XR1255



















































































Результаты поиска

Содержание XR1255

Отзывы:

Похожие инструкции для XR1255

Бренды по названию

Популярные бренды

Xtreme XR1255, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR1255

Отзывы:

Похожие инструкции для XR1255

Бренды по названию

Популярные бренды