Xtreme XR1255 Скачать руководство пользователя страница 60

Страница: 60 / 82

Operation Manual

Operation

Standard Carriage Operation

The standard carriage uses manually adjustable forks and can

be tilted up or down by using the thumb stick on the control

handle.

Figure 70. Attachment Tilt Control Switch.

(A) Attachment Tilt Down (B) Attachment Tilt Up

Fork Positioning Carriage Operation

Caution

Do not adjust forks when Fork Positioning Carriage is load-

ed. Adjusting forks when carriage is loaded may result

in loss of load or carriage damage. Always use the Fork

Positioning control handle to adjust the forks BEFORE

loading the carriage.

Figure 71. Fork Positioning Control Handle

To move the forks outward, press the top button on the front

control handle, or move the auxiliary handle to the left. To

move the forks inward, press the lower button on the front

control handle, or move the auxiliary handle to the right.

When the auxiliary attachment control lever is moved right

or left it activates hydraulic pressure through the quick attach

couplers to move the carriage.

Figure 69. Fork Ratings

(A) Maximum Load Capacity Rating (B) 24 inch Load Center

Because forks are always used in multiples, the total rating

of any combination of forks will be the sum of their rated

capacity. Other than block forks, all forks should be used in

matched pairs. Block forks should be used in matched sets.

The maximum load capacity for this forklift is 12,000 lbs. The

matched pair or set of forks used on this forklift should have

total load ratings which equal or exceed 12,000 lbs. When the

load rating of the forklift differs from the load capacity of the

forks, the lower value becomes the overall load capacity.

Hydraulic attachments have a

maximum hydraulic pressure

rating. Failure to make sure the

attachment is equipped with

a pressure reducing valve, or

is rated to be equal or greater than 3,900 psi, which is the

maximum pressure of the forklift auxiliary hydraulic system

at the quick-disconnect couplers, could result in death or

serious injury.

Warning

Содержание XR1255



















































































Результаты поиска

Содержание XR1255

Отзывы:

Похожие инструкции для XR1255

Бренды по названию

Популярные бренды

Xtreme XR1255, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR1255

Отзывы:

Похожие инструкции для XR1255

Бренды по названию

Популярные бренды