Xtreme XR1255 Скачать руководство пользователя страница 34

Страница: 34 / 82

Operation Manual

Operator Cab

Seat Belt

Lumbar Support

The seat controls include a four (4) position lumbar support

knob. Rotate the lumbar support knob to raise, lower, increase,

or decrease the lumbar support.

Figure 19. Lumbar Support

Weight Suspension Lever

Rotate the weight suspension lever to increase or decrease the

seat cushion suspension based on the weight of the operator

and comfort level desired.

Figure 18. Weight Suspension Lever

Warning

Always check the condition of the seat belt

and mounting hardware before operating

the forklift. If the seat belt or mounting

hardware is defective, it may not properly

restrain the operator, which could result in

Fore and Aft Adjustment Lever

Pull the fore and aft adjustment lever outward from the seat

to release the seat lock. Slide the seat forward or backward to

a comfortable location and release the lever to lock the seat in

the desired position.

Figure 20. Fore and Aft Adjustment Lever

Backrest Angle Adjustment Lever

Pull the backrest angle adjustment lever up to release the seat

backrest lock. Adjust the angle of the backrest and release the

lever to lock the backrest to the desired angle.

Figure 21. Backrest Angle Adjustment Lever

Содержание XR1255



















































































Результаты поиска

Содержание XR1255

Отзывы:

Похожие инструкции для XR1255

Бренды по названию

Популярные бренды

Xtreme XR1255, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR1255

Отзывы:

Похожие инструкции для XR1255

Бренды по названию

Популярные бренды