Xtreme XR1255 Скачать руководство пользователя страница 17

Страница: 17 / 82

Operation Manual

Safety

Dead Engine Towing

Warning

Parking Brake Release (Front Axle)

Fig 3. Brake Release Locations (both sides)

Block all four (4) wheels. Failure to do so could result in

death or serious injury from forklift roll away.

Block all four wheels to prevent the forklift from moving

once the parking brake is disabled.

Position the towing vehicle in place. Attach any chain

needed to secure the disabled forklift.

Under the front of the

forklift, locate the four (4)

brake release bolts (A to D)

at the base of the front axle

[two (2) per side].

Loosen jam nuts. Loosen brake release bolts. Do not

completely remove bolts. Tighten one (1) full turn if bolts

completely back out (repeat for each side). Tighten jam nuts.

Crawl out from under the forklift and clear the area of any

unnecessary personnel.

Carefully remove the blocking from each of the four (4)

tires and tow the vehicle to a secure location.

Fig 4. Brake Release Bolts (both sides of axle)

Fig 5. Brake Release Bolt

Re-Activating Parking Brakes (Front Axle)

Warning

Block all four wheels. Failure to do so could result in death

or serious injury from forklift roll away.

After you have blocked all four (4) wheels, under the front

of the forklift, locate the four brake release bolts [two (2) per

side] at the base of the front axle.

Loosen jam nuts. Tighten brake release bolts until you

begin to feel resistance. Tighten jam nuts. Repeat for each side.

The parking brakes should now be re-activated and the

front wheels are locked. Remove the blocks from all four (4)

wheels.

Verify the parking brake works.

Remove any warning tags from the ignition or steering

wheel.

Содержание XR1255



















































































Результаты поиска

Содержание XR1255

Отзывы:

Похожие инструкции для XR1255

Бренды по названию

Популярные бренды

Xtreme XR1255, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR1255

Отзывы:

Похожие инструкции для XR1255

Бренды по названию

Популярные бренды