Xtreme XR1255 Скачать руководство пользователя страница 44

Страница: 44 / 82

Operation Manual

Operator Cab

Declutch Indicator / Declutch Switch

The Declutch indicator illuminates when the Declutch switch

is set to the ON position. If the declutch indicator does

not illuminate, stop the forklift, follow proper shut down

procedures, tag the forklift with “Do Not Operate” tags, and

have a qualified mechanic service or repair the forklift

BEFORE

placing it into service again.
The Declutch switch (in conjunction with the service brake)

disengages the transmission to prevent the forklift from

moving while raising or lowering a load.
When the Declutch switch is set to ON and the service brake

applied, the transmission is disengaged.
When the Declutch switch is set to OFF, the transmission

remains engaged when the travel select lever is set to either

FORWARD or REVERSE.

Boom Control

The boom control handle has variable motions from the

center position that control boom and tilt functions.

Figure 44. Boom Control Handle

Figure 42. Declutch Indicator / Declutch Switch

The boom control handle is used to raise, lower, extend,

retract the boom, tilt the carriage (or attachment), and

control auxiliary functions (when equipped with a carriage or

attachment with additional functions).
NOTE: The boom control handle is a variable speed control.

Function speed is proportional to handle movement. The

more the handle is moved in the appropriate direction, the

faster the corresponding function will occur.
NOTE: Increasing engine speed can increase boom lift and

extend speed.
NOTE: Two (2) boom functions can be performed at the

same time by moving the handle into the corner between (2)

functions

Boom Control Handle Functions

Function

Purpose

Aux Select Button

Control auxiliary functions

Aux Select Button

Control auxiliary functions

Enable Trigger

Trigger must be enabled for other

functions of the control handle to op-

erate

Tilt Switch

Control carriage tilt (up/down)

Figure 43. Outrigger Switches

Outrigger Switches

The Outrigger Switches are used to lower and raise the

outriggers. The outrigger indicator illuminates when the

outriggers are fully extended and on the ground. Once

outriggers are fully extended, the transmission is disengaged,

and the frame sway is locked. Frame sway lock can be

overridden with the Frame Sway Override Switch.

Содержание XR1255



















































































Результаты поиска

Содержание XR1255

Отзывы:

Похожие инструкции для XR1255

Бренды по названию

Популярные бренды

Xtreme XR1255, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR1255

Отзывы:

Похожие инструкции для XR1255

Бренды по названию

Популярные бренды