Xtreme Power Conversion Corporation
Web/SNMP Cards
Page 33
UPS Management
This page is to set Email details for use by NetAgent.
NetAgent CP, DP series only support SMTP
NetAgent BT, CT, DT series and NetAgent 9 series of BX, CX, DX supports SMTP and
SSL SMTP.
Email Setting
Email Server This section is to set NetAgent Email Server . Note that free email server such as Hotmail,
yahoo, Gmail is not allowed
Email Port
This is to configure the SMTP port to send email
Sender’s Email Address
This section is to set NetAgent’s Email address.
Email Server Requires Authentication
This section is to set whether the Email Server requires authentication.
Account Name
This section is to set an Email account name when the email server requires authentication.
Password
This section is to set a password when the email server requires authentication.
Sending test mail
This is to send a test mail by clicking on Test Mail to the mail address configured
Recipient’s Email Address (for Event Log)
This section is to set Email Addresses to receive warning email sent by NetAgent when an event occurs. It
is valid for up to 8 Email addresses.
Send Email When Event Occurs
This section is to set NetAgent to send warning Email when an event occurs.
Account 1~8
8 email addresses could be configure with selected event
Event
This section is to select events for NetAgent to send warning email. Clicking on Select will open a Select
Events List. Event email may be selected from this list. (The list is the same as under SNMP setting. Please
refer to page 35, figure 31)
Recipient’s Email Address (for Daily Report)
This section is to set Email Addresses to receive Daily Report email sent by NetAgent when an event oc-
curs. It is valid for up to 4 Email addresses.
Send Email for Daily Report ( hh:mm)
This section is to set a particular time for NetAgent to send Daily Report every day.
Send email when Event Log overflows (500 records)
Select YES to have NetAgent send a warning email stating Event Log has reached 500. The data will now
be purged to make room for new data.
