Xtreme Power Conversion Corporation
Web/SNMP Cards
Page 4
UPS Management
Introduction
Features
NetAgent is a new generation SNMP (Simple Network Management Protocol) monitoring product. Not only
can you remotely control the UPS and get the current status of it, the SNMP-3PEX also can provide other func-
tions, such as connecting via Modem or GSM Modem to make monitoring possible when there is no permanent
internet connection and send SMS notification . The SNMP-3PEX can also bee used to connect to SNMP-EMP, to
get the temperature, humidity and water conditions. Smoke detector, gas detector, door and window detector
options are also available.
This product is compatible with Contact Closure and RS232 interface UPS. The communication protocol includes
the Contact Closure, RS232 [MegaTec], RS232 [Phoenixtec], SEC 2400, SEC 9600, Three Phase, Powerware, Smart
APC, EMERSON. User could also provide their own protocol to build in. NetAgent provides a simple and easy
installation procedure. The CD included with the NetAgent cards offer several software programs to allow the
user to configure IP address; central monitoring and multi client shutdown on different operating systems. Other
advance configurations can be accomplished via a Web browser.
Features:
• Provide SNMP MIB to monitor & control UPS
• Auto-sense 10M/100M Fast Ethernet
• Manage and configure via Telnet, Web Browser or NMS
• Support TCP/IP, UDP, SNMP, Telnet, SNTP, PPP, HTTP, SMTP Protocol
• Providing easy setup and upgrade tools via MS-Windows, just a few seconds to finish IP setting, about
1.5 minutes to upgrade firmware.
• Send SNMP TRAP; E-mail and SMS for events notification.
• Auto email daily UPS history report
• Client shutdown software for computer’s file saving and graceful shut down.
• SNMP-3PEX: Environment Measurement (Optional Kits), External modem dial in/out via PPP protocol or
GSM/GPRS Modem
Applications
NetAgent Connects your UPS to the Network
When the UPS is equipped with a NetAgent Web/SNMP card, the system manager can monitor and check the
state of each and every UPS via a Web browser. The manager can monitor and control the UPS by simply brows-
ing the IP address of the NetAgent Web/SNMP card in to the UPS. When an abnormal power condition happens,
the NetAgent can also send trap information or an email to the system manager to take proper action.
NetAgent Provides Shutdown Utilities
When a computer on the network has the NetAgent utility installed, it can locate all of the NetAgent Web/SNMP
cards on the network. When the registered UPS of this NetAgent is in AC failure condition or Battery Low condi-
tion, the operating system can close all the files on the system, and perform a gracefully shutdown. This could
avoid system corruption when the UPS battery runs low.
NetAgent for Surrounding Monitoring
SNMP-3PEX can be used to connect the environmental monitoring utility, SNMP-EMP, to get the temperature/
humidity/smoke/fire indications. This information can also be displayed on the NetAgent Web page. When an
abnormal condition happens, it can also be sent as a trap to the system manager.
