Xtreme Power Conversion Corporation
Web/SNMP Cards
Page 26
UPS Management
Test UPS for every
This section is to schedule the UPS to test once a week or once every two weeks or not to test
Test UPS on Weekday
This section is to set the UPS to test on a particular day of a week.
Start Time of UPS Test (hh:mm)
This section is to set the UPS to test at a specific time on the test day.
UPS Test Type
This is to select which test to perform.
Warning Threshold Value
Time out of after lost of connection
This section is to set a period of time after which NetAgent will send a disconnection warning message.
This warning message will be sent after NetAgent has lost contact with the UPS for the time specified.
Critical Loading (%)
This section is to set the UPS critical loading. (shown as %) NetAgent will send a warning message when
the UPS load exceeds this value.
Critical Temperature (C)
This section is to set the UPS critical internal temperature. NetAgent will send warning messages when
the UPS temperature exceeds this value.
Critical Capacity (%)
This section is to set the UPS critical battery capacity (shown as % )NetAgent will send warning messages
when UPS battery level goes below this value.
UPS Configuration
UPS On/Off Schedule
