Xtreme Power Conversion Corporation
Web/SNMP Cards
Page 53
UPS Management
General
1. Host Connection
This is to configure how ClientMate connects with NetAgent; NetAgent 9 or
UPSilon / RUPS 2000.
SNMP V1 /V2: This is default to connect with NetAgent or NetAgent 9
SNMP V3 : This only use on NetAgent 9. NetAgent 9 uses
SNMP V3 protocol to connect with ClientMate. When select such communication, it requires to enter
username/ password and appropriate authentication and privacy. ( SNMP V3 configuration may refer to
SNMP of the NetAgent )
UPSilon / RUPS: To connect with UPSilon or RUPS server by entering the IP
address of the PC
2. Host
Press the “Query” to search the host on the network automatically. If a host located on different network
segment. Please input the IP in the HOST edit box. The IP searched on the Connect Query:
(N): The NetAgent Host
(S): The UPSilon2000 or RUPS2000 Host
3. SNMP Port and Community Name (For NetAgent only)
The community name and SNMP port must be the same as configured on
NetAgent. Default SNMP Port is 161
4. Broadcast Warning Messages (On Server platform only)
To configure if sending the warning messages when power failed (only for WinNT, Win2000 and XP
server operating system)
5. Configuration Password
To set if password is require to be entered when effect any new setting on ClientMate. If lost of pass-
word, just re-install the ClientMate.
Power Failure
6. Use Windows ACPI Interface
To shutdown the server via Windows ACPI
7. Shutdown Windows
To configure if shutdown or Sleep the Windows system when power failure.
8. When AC failed, commence computer shutdown sequence in xx Min.
To configure the time delay between the AC failure and the system shutdown.
9. When Battery Low, commence computer shutdown sequence in xx Min.
To configure the time delay between the Battery Low and system shutdown.
10. When Bettery capacity reaches to X %
To configure to shutdown when battery capacity meets at _ %
11. Auto save application files
Check if to save the application files before system shutdown
12. Run Application before shutdown computer
Execute the application before system shutdown.
