265 Prado Road, Suite 1 | San Luis Obispo, CA 93401 | 805.541.0100 | xpressfill.com | [email protected]
9
| XpressFill Systems LLC
Figure 2
1. Air compressor
2. CO2 tank
3. CO2 regulator
4. CO2 line to keg inlet
5. Pressurized keg
6. Line to “Inlet” input on filler
7. CO2 line to “CO2” input on filler
8. Compressed air line to “Air” input on filler
The recommended operating pressures for the CO2 and air compressor are listed below. Please keep in mind that
varying temperatures and product properties will mean that adjusting the pressures will be necessary for your
product. You are encouraged to adjust these pressures carefully until you find a combination that works for your
product and bottling environment.
Pressure Recommendations
Air:
30 psi recommended
CO2:
30 psi recommended
Tip:
Please see page 11 for “Adjusting Pressures” to set pressures outside the recommended settings.
Warning:
Please follow the recommended settings of the equipment you are using. Exceeding manufacture
recommended settings may result in injury to self and others, as well as damage and/or failure of the machine.
