1.
Fill Indicator Light:
This green light will turn on
while the liquid is flowing from the spout.
2.
Fill Switch:
The three (3) position fill switch turns
the fill cycle on (up position), turns the fill cycle off
but maintains a seal (center position), and releases
the bottle supporting foot rest after the bottle
pressure has been safely released (down position).
3.
Pressure Release Switch:
This switch electrically
activates a pressure release valve to release the
pressure inside your bottle. It will be used at the end
of each fill sequence or in an emergency.
4.
Bottle Pressure Gauge:
This gauge displays the
pressure inside the bottle, which should be lower
than the pressure inside your keg or liquid reservoir.
(See our operating procedures on page 10 for our
recommendations for what each of these gauges
should display).
5.
Bottle Pressure Adjustment Knob:
This knob allows
you to adjust the pressure inside your bottle. Turning
the knob counterclockwise will lower the pressure,
while turning it clockwise will increase the pressure.
This will typically only need to be adjusted when
starting a new filling session and during cleaning.
6.
Bottle Foot Rest:
These feet will hold your bottle
securely in place once the fill sequence is started.
7.
Larger Spout:
This spout is used for the gas flush
and filling sequences of the bottle.
8.
Smaller Spout:
This spout is vented to relieve the
pressure in your bottle and acts as the sensor for the
automatic level filling system.
Warning:
Keep your hands clear of the bottle, the
foot rest, or spouts to prevent injury.
9.
Stopper:
The stopper seals your bottle and helps to
control the level your bottles is filled to. While the
stoppers are already set for the level of a typical
12 oz. beer bottle, they can be adjusted up and down
on the spout to fill to your own specifications.
10.
Pneumatic Ram:
The pneumatic ram raises the
bottle and foot rest and is activated when the filling
sequence begins.
265 Prado Road, Suite 1 | San Luis Obispo, CA 93401 | 805.541.0100 | xpressfill.com | [email protected]
7
| XpressFill Systems LLC
