If at any time you have issues with the setup or adjustment of your XF2500 bottle filling machine, or any other
questions about filling your product, please contact us at the number listed at the front of this manual. We are always
happy to assist you.
Excessive Foaming
Excessive foaming is usually the result to the keg pressure not being high enough, too high fluid temperature, or the
indicated pressure on the filler gauge is too low. The difference between the keg pressure and the counter pressure
indicated on the filler should be around 5 psi. The higher the pressure, the more CO2 will stay in solution.
Turning the Bottle Pressure Adjustment Knob clockwise will increase the bottle pressure and reduce foaming.
The higher the bottle pressure and lower the temperature, the more CO2 will stay in solution.
265 Prado Road, Suite 1 | San Luis Obispo, CA 93401 | 805.541.0100 | xpressfill.com | [email protected]
12
| XpressFill Systems LLC
5
Troubleshooting
Premature Shut Off
The XF2500 is a Level Fill Machine, meaning when liquid
touches a spout and probe, it will automatically shut off. If
moisture is allowed to collect between the spout and the probe,
the filler will shut off prematurely, stopping the fill or not
allowing the fill to begin at all, which is characterized by the
green LED fill indicator light to flash quickly and stay off as the
machine senses a full bottle is in place.
Dry the area between the spout and the probe with a clean
towel or use the compressor to air dry. Once completely dry, the
fill will resume.
