XT2500 Product Manual
Page 81 | 92
CONFIDENTIAL AND PROPRIETARY
6.6.6. Third Party
Command
Function
:ejm
Enable Third Party debug channel monitoring
:djm
Disable Third Party debug channel monitoring
:djdbg
Disable Third Party XVBMG debug trace
:ejdbg
Enable Third Party XVBMG debug trace
:qji
Print out parameter tag information
:qji diag
Print out tag transaction diagnostic info
:gjfw x <serial_port_id>
Upgrade Third Party via xmodem
:gjscr x <serial_port_id> <flag -
optional>
Upload VIS file via xmodem (flag = 1; erases all VIS's first)
:ujcmd tag <tag id> <ip_dst>
Run XVBMG on tag id; if no VIS file found, downloads VIS first (:edm &
:ekm)
:ujcmd init
Initialize Third Party functions (:edm)
:ujcmd exec
Displays Third Party FW version (:edm)
6.6.7. Device
Command
Function
:rdval reset
Read device reset reason
Reason codes:
Code
Reason
Description
0
Power
applied
Main supply voltage connected to device
1
Low Power
Reset caused by the micro Hibernation
module (not utilized)
2
Watchdog
Reset caused by the micro Watchdog
module.
3
Software
Reset caused by our device firmware.
4
User
Main micro reset pin toggled (not
utilized)
5
Brownout
Reset caused by the micro BOR module
6
Supply
Monitor
Not implemented.
7
Factory Reset
Reset caused by the micro Hardware
System Service Request.
8
System Error
Not implemented.
9
Unknown
Catch for any other micro reset source
we have not defined.