XT2500 Product Manual
Page 89 | 92
CONFIDENTIAL AND PROPRIETARY
6.6.17. One-Wire Bus
Command
Function
:wwdm <mask>
Sets one-wire bus debug mask
:wwdm ts <mask>
Sets one-wire bus temp sensor debug mask
:wwdm drv <mask>
Sets one-wire bus driver id debug mask
:ewm
Enable one-wire bus debug channel monitoring
:dwm
Disable one-wire bus debug channel monitoring
:rwi <channel 0/1>
Read one-wire bus info
:rwval <channel 0/1>
Read one-wire bus temp sensor value
6.6.18. OBD
Command
Function
:qoi info
Query OBD vehicle information
:qoi status
Query OBD status information
:qoi persist
Query OBD persisted information
:qoi trip
Query OBD trip information
:qoi ss
Query OBD snapshot parameter information
:qoi ss2
Query OBD snapshot additional parameter information
:qoval
Query OBD calculated information
:qoi viol
Query OBD Violations
:qost
Query OBD state
:roval dtc
Read OBD DTC List
:woval p <protocol> <cll>
Set OBD protocol to a com logical link
:woval dtc <mil value> <total
dtc> <total ecu count>
Manually write DTC data (defaults to CAN protocol); if all fields are 0, DTCs
are cleared
:wocmd debug <0/1>
Disable/enable obd debug log
:wocmd debug erase
Erase OBD debug log
:wocmd debug lock
Lock OBD debug off
6.6.19. System
Command
Function
:cycfg
Clear system configs (set all parameters to default/RAM only and
use :vycfg to make permanent)
:cycfg recipes
Clear system configs (set all parameters to default/RAM only and
use :vycfg to make permanent); clear all recipes/appends from flash
:ehm
Enable watchdog timer debug monitor
:gycfg x <serial_port_id>
"<name>"
Upgrade paramset via xmodem; "<name>" is the version of the paramset